*if equipped
5
2 01 7 M K C
4
3
Service Engine Soon Light
Lights briefly when you switch on the
ignition. If it remains on or blinks after you start
the engine, the On-Board Diagnostics (OBD-II)
system has detected a problem. Drive in a
moderate fashion (avoid heavy acceleration
and deceleration) and contact your authorized
dealer as soon as possible.
4
Right Vehicle Information Display
Displays information about Entertainment,
Climate, Phone and Navigation*. Use the right,
5-way controls located on your steering wheel
to scroll through, highlight and make minor
adjustments within a selected menu. Refer to
the
SYNC 3
chapter in your
Owner’s Manual
for
more information.
5
Steering Wheel Controls
Audio
Press
VOL +
or
–
to increase or decrease
volume levels. Press
|
⊳ or
⊲|
to access the next
or previous radio station preset, CD track or
MP3 selection.
Voice
Press to answer call.
Press
to exit phone mode or end a call.
Press to access voice recognition.
6
Power Tilt and Telescoping Steering
Column
*
The 4-way rocker control allows you to adjust
the steering wheel to the position you desire.
7
Push Button Start
Allows you to start your vehicle by pressing
the
START STOP
button while fully pressing
down on the brake pedal. If you leave your
vehicle idling for an extended period of
time, it automatically shuts down. Before the
engine shuts down, a message appears in
the information display, allowing the driver to
override the shutdown feature.
Note:
Your intelligent access key must be inside
the vehicle for the ignition to start. The keyless
warning alert sounds the horn twice when you exit
the vehicle with the key and the vehicle is still on.
8
Push Button Shift Transmission
Your vehicle includes an electronic transmission.
The shift buttons are on the center stack next to
the SYNC® 3 system.
Putting Your Vehicle in Gear
A. Fully press down the brake pedal.
B. Press and release one of the
PRNDS
buttons to select your gear.
C. The gear shift button you select lights and the
information display shows the selected gear.
D. Release the brake pedal and your
transmission remains in the selected gear.
Note:
When entering an automatic car wash,
always put your vehicle into
Stay in Neutral
mode.
To put your vehicle in
Stay in Neutral
mode, make
sure your vehicle is stationary first and then:
A. Press the neutral (N) button on the shifter
assembly once. The information display
screen then reads
“Press N again to enter
Stay in Neutral mode”
.
B.
Press
N
on the shifter assembly again.
The information display displays a message
to confirm that you are in the
Stay in
Neutral
mode, and the
N
button flashes
continuously to confirm your selection.
C.
To
exit
Stay in Neutral
mode, fully press
down on the brake pedal, then press and
release another gear. Release the brake
pedal and your transmission remains in
the selected gear.
9
Auto-Start-Stop*
For more information on Auto-Start-Stop,
see page 17.
10
Auto Hold
For more information on Auto Hold,
see page 15.
11
Hazard Warning Flashers
Instrument Panel
1
Electric Parking Brake
The operating switch
replaces the conventional handbrake, and is to the left of the steering column.
To use, pull the switch. The brake system warning lamp lights to confirm that you applied the electric
parking brake. You can release the electric parking brake manually by switching the ignition on, pressing
the brake pedal and then pressing the electric parking brake switch down. The brake system warning
lamp turns off. Refer to the
Brakes
chapter of your
Owner’s Manual
for more details.
2
Left Vehicle Information Display
Provides information about various systems on
your vehicle. Use the left, 5-way control located
on the steering wheel to choose and confirm
settings and messages. Refer to the
Information
Displays
chapter in your
Owner’s Manual
for
more information.
