To erase programming on the Car2U
威
system (individual buttons cannot
be erased), use the following procedure:
1. Firmly press the two outside
Car2U
威
system buttons
simultaneously for approximately
20 seconds until the indicator lights
begin to blink rapidly. The indicator
lights are located directly above the
buttons.
2. Once the indicator lights begin to
blink, release your fingers from the
buttons. The codes for all buttons
are erased.
If you sell your vehicle equipped with the Car2U
威
system, it is
recommended that you erase the programming for security reasons.
FCC and RSS-210 Industry Canada Compliance
The Car2U
威
system complies with Part 15 of the FCC rules and with
RSS-210 of Industry Canada. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received including interference
that may cause undesired operation.
Changes and modifications to the Car2U
威
system transmitter by other
than an authorized service facility could void authorization to use the
equipment.
POWER LIFTGATE
You can power open or close the liftgate with the following controls.
•
instrument panel control button
•
remote entry transmitter button
•
outside liftgate control button
•
control button in the rear cargo area
Opening and Closing the power liftgate:
WARNING:
Make sure all persons are clear of the power liftgate
area before using the power liftgate control.
WARNING:
To avoid injury to third-row occupants when closing
the liftgate, ensure that the head of any occupant is not in the
path of the closing liftgate.
Driver Controls
144
2010 MKT
(mkt)
Owners Guide, 1st Printing
USA
(fus)
