Lincoln 2007 MKZ Скачать руководство пользователя страница 104

Страница: 104 / 272

Climate controlled seats air filter replacement (if equipped)

The climate controlled seat system includes air filters that must be
replaced periodically. Refer to the

Scheduled Maintenance Guide

for

more information.

•

There is a filter located under
each front seat.

•

The filter can be accessed from the first row seat. Move the front
seats all the way back and up to ease access.

Note

: The air filter is underneath an electrical harness. Be careful not to

damage the electrical harness while removing the air filter.

To remove an air filter:

•

Remove key from ignition.

•

Push up on the outside rigid edge
of the filter and rotate toward the
front of the vehicle once tabs are
released.

•

Remove filter.

2007 Zephyr

(378)

Owners Guide (post-2002-fmt)
USA

(fus)

Seating and Safety Restraints

104

Содержание 2007 MKZ

















































































































































































































































































Результаты поиска

Содержание 2007 MKZ

Отзывы:

Похожие инструкции для 2007 MKZ

Бренды по названию

Популярные бренды

Lincoln 2007 MKZ, Руководство пользователя

Результаты поиска

Содержание 2007 MKZ

Отзывы:

Похожие инструкции для 2007 MKZ

Бренды по названию

Популярные бренды