Lincoln 2003 LS, Инструкция по эксплуатации и руководство пользователя

Страница: 135 / 297

3. Enter your personal 5-digit code. Each number must be entered
within five seconds of each other.
4. Enter a sixth digit to indicate which personality feature should be
recalled by the personal code.
Note: The lock motors will cycle, locked
then unlocked.
•
1
•
2 recalls driver personality 1.
•
3
•
4 recalls driver personality 2.
•
9
•
0 does not recall a driver personality.
Wait 5 seconds without pressing a keypad button in order to store a
personal entry code.
Tips:
•
Do not set a code that uses five of the same number.
•
Do not use five numbers in sequential order.
•
The factory set code will work even if you have set your own personal
code.
•
If you set a personal code and store it over an existing personal code
it will erase that personal code only.
Erasing personal code
1. Enter the factory set 5–digit code.
2. Press and hold the 1
•
2 for two seconds and release; this must be
done within five seconds of completing step 1.
3. Press and hold the 1
•
2 for two seconds to erase the customer
programmed code; this must be done within five seconds of completing
step 2.
Your personal code is now erased and only the factory set 5–digit code
will work.
Anti-scan feature
If the wrong code has been entered 35 times, the keypad will go into an
anti-scan mode. This mode disables the keypad for one minute and the
keypad lamp will flash.
The anti-scan feature will turn off after:
•
one minute of keypad inactivity.
•
pressing the UNLOCK control on the remote entry transmitter.
•
the ignition is turned to the ON position.
•
a key turned to the UNLOCK position on the driver’s door.
Locks and Security
134