Lincoln 2002 Town Car Скачать руководство пользователя страница 123

Страница: 123 / 249

Always transport children 12 years old and under in the back
seat and always properly use appropriate child restraints.

National Highway Traffic Safety Administration (NHTSA)
recommends a minimum distance of at least 25 cm (10 inches)

between an occupant’s chest and the driver air bag module.

Never place your arm over the air bag module as a deploying air
bag can result in serious arm fractures or other injuries.

Steps you can take to properly position yourself away from the air bag:

•

Move your seat to the rear as far as you can while still reaching the
pedals comfortably.

•

Recline the seat slightly (one or two degrees) from the upright
position.

Do not put anything on or over the air bag module. Placing
objects on or over the air bag inflation area may cause those

objects to be propelled by the air bag into your face and torso causing
serious injury.

Do not attempt to service, repair, or modify the air bag
supplemental restraint systems or its fuses. See your Ford or

Lincoln Mercury dealer.

The front passenger air bag is not designed to offer protection to
occupants in the center front seating position.

Modifications to the front end of the vehicle, including frame,
bumper, front end body structure and tow hooks may affect the

performance of the air bag sensors increasing the risk of injury. Do not
modify the front end of the vehicle.

Seating and Safety Restraints

122

Содержание 2002 Town Car


























































































































































































































































Результаты поиска

Содержание 2002 Town Car

Отзывы:

Похожие инструкции для 2002 Town Car

Бренды по названию

Популярные бренды

Lincoln 2002 Town Car, Руководство пользователя

Результаты поиска

Содержание 2002 Town Car

Отзывы:

Похожие инструкции для 2002 Town Car

Бренды по названию

Популярные бренды