Lincoln 2001 Lincoln Town Car Скачать руководство пользователя страница 168

Страница: 168 / 241

ENGINE OIL

Checking the engine oil

Refer to the scheduled maintenance guide for the appropriate intervals
for checking the engine oil.

1. Make sure the vehicle is on level ground.

2. Turn the engine off and wait up to 10 minutes for the oil to drain into
the oil pan.

3. Set the parking brake and ensure the gearshift is securely latched in P
(Park).

4. Open the hood. Protect yourself from engine heat.

5. Locate and carefully remove the
engine oil level indicator (dipstick).

6. Wipe the indicator clean. Insert the indicator fully, then remove it
again.

•

If the oil level is

within this

range,

the oil level is acceptable.

DO NOT ADD OIL.

DO NOT OVERFILL

Maintenance and care

167

Содержание 2001 Lincoln Town Car


















































































































































































































































Результаты поиска

Содержание 2001 Lincoln Town Car

Отзывы:

Бренды по названию

Популярные бренды

Lincoln 2001 Lincoln Town Car, Руководство пользователя

Результаты поиска

Содержание 2001 Lincoln Town Car

Отзывы:

Бренды по названию

Популярные бренды