Lincoln 1999 Navigator Скачать руководство пользователя страница 83

Страница: 83 / 217

2. Lift the handle and push the seatback toward the front of the vehicle.

3. Press the green control on the seatback to release the closeout panel.
Rotate the panel to closeout the space in the floor.

4. Once the second row seats are in the down position, the front seats
may be readjusted.

Returning the seat to upright

Always latch the vehicle seat to the floor, whether the seat is
occupied or empty. If not latched, the seat may cause injury

during a sudden stop.

1. Rotate the closeout panel onto
the seatback and press the black
control (adjacent to the green
control) to lock.

2. Locate and lift the handle marked
“A”.

3. Pull on the seatback while lifting
the handle to lift the seat into the
upright position.

Seating and safety restraints

Содержание 1999 Navigator


























































































































































































































Результаты поиска

Содержание 1999 Navigator

Отзывы:

Похожие инструкции для 1999 Navigator

Бренды по названию

Популярные бренды

Lincoln 1999 Navigator, Руководство пользователя

Результаты поиска

Содержание 1999 Navigator

Отзывы:

Похожие инструкции для 1999 Navigator

Бренды по названию

Популярные бренды