Operating instructions
Fill the lubricant container. Refer to reverse
page for instructions.
Wipe fittings clean before lubricating.
Push coupler onto fitting at slight angle and
then center coupler on the fitting.
Operate lever gun handle to lubricate taking
care not to damage seals by excessive pres-
sure or lubricant volume. After lubricating
turn coupler at a slight angle to release grip
of the coupler jaws.
To install a lubricant
cartridge
1
Remove head and plunger assembly from
container tube.
2
To remove an empty cartridge pull back
on the follower handle until the follower
rod is fully extended. Then carefully
release the follower handle to eject the
empty cartridge from the container tube.
Pull back on the follower handle. When
the follower rod is fully extended pull it
sideways to latch the rod groove into the
keyhole slot in the container cap.
3
Remove the caps from both ends of the
cartridge and insert the large open end of
the cartridge into the container tube.
4
Loosely assemble the head and plunger
assembly to the container tube.
Extend the lever gun handle away from
the container tube and disengage the fol-
lower rod from the container cap. Engage
the follower rod with the follower by
rotating the follower handle. Exert force
on the follower handle until lub ricant
oozes from the tube and head interface.
Tighten container tube into the head and
plunger assembly.
5
Disengage the follower rod from the fol-
lower by rotating the follower handle.
Push the follower rod into the container.
Container
Lubricant cartridge
Large
cap
Small
cap
To fill lever gun from
bulk lubricant
container
1
Remove head and plunger assembly from
container tube.
2
Pack lubricant into cavity of the head and
plunger assembly.
3
Insert the open end of the container tube
into lubricant. Slowly pull the follower
handle back while pushing the container
tube deeper into the lubricant to prevent
air pockets from being pulled into the
container tube.
4
When the follower rod is fully extended
pull it sideways to latch the rod groove
into the keyhole slot in the container cap.
5
Loosely assemble the head and plunger
assembly to the filled container tube.
Release the follower rod from the con-
tainer cap and disengage the follower rod
from the follower by rotating the follower
handle. Push the follower rod into the
container. Slowly unscrew the container
tube from the head and plunger assembly
until lubricant oozes from the interface.
Tighten container tube into the head and
plunger assembly.
To fill lever gun with a
filler pump
Engage the follower rod with the follower by
rotating the follower handle. Insert the lever
gun filler nipple into the filler pump socket
and extend the lever gun handle away from
the container tube. Operate the filler pump
to fill the lever gun container. When the fol-
lower rod groove is exposed the container is
filled (follower rod will be extended approxi-
mately 8 in.). Disengage the follower rod
from the follower by rotating the follower
handle. Push the follower rod into the
container.
4
Содержание 1142CLR
Страница 7: ...This page left intentionally blank 7...
