OPERATING INSTRUCTIONS
Headgear Adjustment
HEAD SIZE ADJUSTMENT:
HEADGEAR TIGHTNESS is adjusted by pushing
in the Ratchet Knob and turning to adjust for the desired head size. This knob
is located at the back of the helmet.
HEADGEAR CROWN ADJUSTMENT
is
made by adjusting for comfort and snapping the pin into the hole to lock se-
curely in place.
TILT:
Tilt adjustment is located on right side of helmet. Loosen the right head-
gear tension knob and push the top end of the adjustment lever outward until
the lever’s Stop Tab clears the notches. Then rotate the lever up or down to
the desired tilt position. The Stop will automatically engage again when re-
leased locking the helmet into position.
FORE / AFT ADJUSTMENT:
Adjusts the distance between the user’s face
and lens. To adjust, loosen the outside tension knobs and slide forward or back
to desired position and retighten.
NOTE:
Make sure both sides are equally
positioned for proper operation.
4
wn
stment
Ratchet
Knob
Fore-Aft
Adjustment
Tilt
Adjustment
Содержание VIKING 1740 Series
Страница 13: ......
