• Simple wire harnessing keeps connections to a minimum for greater
reliability. Lead and harness strain reliefs on all control connections
help ensure trouble-free performance.
• Engine Protection System includes automatic shutdown for low oil
pressure or high engine temperature.
• Indicator light turns on for low oil pressure or high engine
temperature. A second indicator light turns on if the engine
battery charging system malfunctions.
• Circuit breaker protection on the battery ignition system provides
added component protection.
• Environmental friendly engine! Engine has a closed breather
system to keep the engine compartment and ground clean. This
system eliminates oil mist from collecting inside the engine
compartment, especially on surfaces that would lower engine
cooling efficiency.
• Self-bleeding engine simplifies startup if your fuel tank runs dry.
• Kubota
®
and Deutz
®
engine camshafts are gear-driven. No timing
belt maintenance.
• Printed circuit boards are environmentally-
shielded using Lincoln’s engineered potting
and protective frame trays.
• Dependability and long life aided by
all-copper windings in rotor and stator
with high quality insulation.
• Standard stainless steel roof, side panels and engine-access door
deliver added protection, durability and corrosion-resistance.
Eliminates the need to paint or replace rusting panels.
• Approved by the Canadian Standards Association (CSA).
• Manufactured under a quality system certified to ISO 9001
requirements and ISO 14001 environmental standards.
• Three-Year Lincoln Warranty (parts and labor) on welder.
(Engine is warranted separately by the manufacturer.)
Dimensions (6)
Product
Ordering
CC/Pipe-Rated DC Output (1)
CV Rated Output (1)
H x W x L
Weight
Name
Information
Description
Current/Voltage/Duty Cycle Current/Voltage/Duty Cycle
AC Power (3) (4)
inches (mm)
lbs. (kg)
Vantage
®
300
K2409-2
300 Amp DC Welder with
DC Constant Current
DC Constant Voltage(2)
12,500 Peak
35.9 x 25.3 x 60.0 in
1035 lbs.
Kubota
®
Engine Gauges
300A/32V/100%
300A/32V/100%
Watts, 60 Hz
(913 x 642 x 1524mm)
(469 kg)
350A/28V/100%
350A/28V/100%
Vantage
®
300
K2499-2
12,500 Watts Peak
30-400 Amps
Two 120V
1150 lbs
Deutz
®
11,000 Watts
14-32V
Duplex GFCI
(522 kg)
Continuous AC Power
DC Pipe Current
Single Dial
Receptacles
3-Phase
300A/32V/100%
Continuous Control
20A Per Duplex
40-300A
40A Total (5)
11,500 Watts Peak
Touch-Start TIG
®
Range
Wire Feeder Power
1-Phase
10,000 Watts
250A/30V/100%
120V/60Hz
Full KVA
Continuous AC Power
20-250 Amps
42V/60Hz
Receptacle
1-Phase
42A@240V
Single Dial
42A@120V Each
Continuous Control
Branch Circuit(5)
60V DC Max OCV
@1890 RPM
3-Phase
Full KVA
Receptacle
27A@240V
Vantage
®
300
www.lincolnelectric.com
[4]
A CLOSER LOOK
MACHINE SPECIFICATIONS
(1) High Altitude: For maximum rating, derate the output 2.5% to 3.5% for every 1,000 ft. (300 m). High Temperature: For maximum rating, derate 2 volts for every 18°F (10°C)
above 104°F (40°C).
(2) DC Constant Voltage capability provides convenience and added safety when welding in electrically hazardous conditions.
(3) When welding, available auxiliary power will be reduced. Output voltage is /- 10% at all loads up to rated capacity.
(4) 120V will operate either 60Hz or 50/60 Hz power tools, lights, etc.
(5) Circuits cannot be wired in parallel to operate the same device.
(6) Height is to top of case. Add 5 in. (127 mm) to top of exhaust elbow for Kubota
®
and for Deutz
®
.
QUALITY AND RELIABILITY
ENGINE SPECIFICATIONS
(7) Kubota
®
warranty is 2 years/2,000 hours for machines shipped within the U.S., Canada, Pacific Ocean region and Western Europe. Warranty is 1 year/1,000 hours for Central
and South America, Asia, Africa and Middle East.
(8) Deutz
®
warranty is 2 years/2,000 hours for all components, 3 years/3,000 hours for major components.
Product
Horsepower &
Operating
Fuel
Name
Description
Displacement
Capacities
Speeds
Consumption
Kubota
®
V1505 (7)
4 Cylinder, 4 Cycle
22 HP@1800 RPM
FUEL:
300A Load
1.2 Gal/Hr
Water-Cooled Diesel Engine,
15 gals (57 ltrs)
1800 RPM
4.4 Ltr/Hr
12V Electric Start,
91 cu in
OIL:
High Idle
0.4 Gal/Hr
Dry Type Air Cleaner,
(1.5 ltrs)
6.4 qts (6.0 ltrs)
1890 RPM
1.5 Ltr/Hr
Fuel Filter with Water Separator
RADIATOR COOLANT:
Low Idle
0.3 Gal/Hr
EPA Tier 4i
7.2 qts (6.8 ltrs)
1350 RPM
1.1 Ltr/Hr
Deutz
®
D2008L4 (8)
4 Cylinder, 4 Cycle
24 HP@1800 RPM
FUEL:
300A Load
1.2 Gal/Hr
Water-Cooled Diesel Engine,
15 gals (57 ltrs)
1800 RPM
4.4 Ltr/Hr
12V Electric Start,
95 cu in
OIL:
High Idle
0.5 Gal/Hr
Dry Type Air Cleaner,
(1.6 ltrs)
7.8 qts (7.4 ltrs)
1800 RPM
1.8 Ltr/Hr
Fuel Filter with Water Separator
RADIATOR COOLANT:
Low Idle
0.3 Gal/Hr
EPA Tier 4i
7.9 qts (7.5 ltrs)
1400 RPM
1.3 Ltr/Hr
