Lincoln Electric SP-135T, Руководство оператора

Страница: 14 / 45

B-1
OPERATION
B-1
SP-135T
Read entire operation section before
operating the SP-135T.
ELECTRIC SHOCK can kill.
• Do not touch electrically live
parts or electrode with skin or
wet clothing. Insulate yourself
from work and ground.
• Always wear dry insulating
gloves.
FUMES AND GASES can be
dangerous.
• Keep your head out of fumes.
• Use ventilation or exhaust to
remove fumes from breathing
zone.
WELDING SPARKS can
cause fire or explosion.
• Keep flammable material away.
• Do not weld on closed contain-
ers.
ARC RAYS can burn eyes
and skin.
• Wear eye, ear and body protec-
tion.
Observe all safety information throughout
this manual.
WARNING
GENERAL DESCRIPTION
The SP-135T is a complete semiautomatic constant-
voltage DC wire feeder / power source arc welder. It
has been designed for workshop, hobby, automotive
and light maintenance. Included is a tap-switch con-
trolled, single phase constant voltage transformer /
rectifier power source and a wire feeder welding gun
for feeding .023 - .025
” (0.6 mm) through .030 ” (0.8
mm) solid steel electrode. An optional kit is available
for feeding .035
” (0.9 mm) Innershield
®
NR-211-MP
flux-cored wire.
The SP-135T is ideally suited for individuals having
access to 120 volt AC input power, and wanting the
ease of use, quality and dependability of both gas
metal arc welding or GMAW (also known as MIG
welding) and the Innershield electrode process (self
shielded flux cored or FCAW). The SP-135T is a
rugged and reliable machine that has been designed
for dependable service and long life.
RECOMMENDED PROCESSES
The SP-135T can be used for welding mild steel using
the Gas Metal Arc Welding (GMAW or MIG, Metal
Inert Gas) single pass process, which requires a sup-
ply of shielding gas, or the flux-cored arc welding
(FCAW) process using Innershield
®
electrode wire.
The SP-135T is configured for use with the GMAW
process as delivered from the factory.
OPERATIONAL CONTROLS
The SP-135T has the following controls as standard:
Control Power ON/OFF Switch, Voltage Control, Wire
Speed Control, Trigger Switch, and a Circuit Breaker.
With the optional Spot/Stitch Timer Kit installed, the
following controls are also included: Mode switch and
Time Control.
DESIGN FEATURES
●
Operates on 120 volt input — no special wiring
required.
●
“ Cold electrode ” until gun trigger is pressed for an
added measure of safety.
●
Overload protection — incorporates both a thermo-
stat and a circuit breaker.
●
Quality wire drive with electronic overload protec-
tion.
●
“ Quick Release ” idle roll pressure arm is easily
adjusted.
●
Reversible, dual groove drive roll. Drive roll will
feed .023
– .025 ” (0.6 mm) and .030" - .035" (0.8 -
0.9 mm) diameter wire.