manualshive.com logo in svg

Lincoln Electric RANGER 10-LX, Руководство по обслуживанию

Поделиться
Скачать
Lincoln Electric RANGER 10-LX Скачать руководство пользователя страница 33

TIG WELDING

TIG Module (K930-1) - The TIG Module is an acces-
sory that provides high frequency and shielding gas
control for AC and DC GTAW (TIG) welding applica-
tions.  It provides contactor control of constant current
welding power sources having an internal contactor.

The K930-1 TIG Module is supplied without accessories.
Arc Start switches, Amptrols, cables, torches and
mounting brackets must be purchased separately.

Docking Kit (K939-1) - For mounting the K930-1 TIG
Module on top of the RANGER 10-LX.

Control Cable (K936-1) - Control cable for connecting
the K930-1 TIG Module to a RANGER 10-LX 9-Socket
(at the TIG Module) to 14-pin (at RANGER 10-LX).
(Contains circuits 2, 4, 31, 32, 75, 76, 77 and ground.)

Arc Start Switch (K814) - A remote start switch used
in conjunction with the K930-1 TIG Module to energize
the output terminals via the TIG Module.

K812 – Hand Amptrol.

K870 – Foot Amptrol.

NOTE:  TIG welding requires a Magnum™ TIG Gun,
appropriate Magnum Parts Kit and argon gas.

SEMIAUTOMATIC FCAW AND MIG WELDING

LN-25 Wire Feeder – This portable unit provides
CC/CV for flux-cored arc welding (FCAW) and metal
inert gas welding (MIG). 

LN-7 or LN-8 Wire Feeder  – Semiautomatic, con-
stant speed wire feeders.

NOTE:

Gas-shielded welding requires a Magnum

Gun.  Gasless welding requires an Innershield Gun.

Magnum Spool Gun (K487-25)  – A lightweight, semi-
automatic wire feeder for aluminum welding with
argon gas.  Has built-in remote wire speed control in
the handle.  Requires the K488 SG Control Module.
Includes 50 feet (15.2 meters) of power cable.

SG Control Module (K488) – Controls wire speed and
gas flow.  Provides the required control interface
between the RANGER 10-LX and the K487-25
Magnum Spool Gun.

ACCESSORIES

C-3

C-3

RANGER 10-LX

Retur

n to Section TOC

Retur

n to Section TOC

Retur

n to Section TOC

Retur

n to Section TOC

Retur

n to Master TOC

Retur

n to Master TOC

Retur

n to Master TOC

Retur

n to Master TOC

Содержание RANGER 10-LX






































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды