Lincoln Electric POWER WAVE R450, Руководство оператора

Страница: 33 / 52

B-11
OPERATION POWER WAVE ® R450
BLuEtOOth sEttIngs
To view or change the settings for the Power Wave ® Bluetooth
connection, use the Selection KNOB to select BLUT OOTH from the
User Configuration menu and press the Right BUTTON.
Note: Machines shipped from the factory have the Bluetooth
radio disabled. You must enable the Bluetooth radio
using the options described in this section before
attempting to connect to the Power Wave
®
using
Bluetooth.
Note: For more information on how to connect to your
Power Wave
®
, or to learn how to configure advanced
settings, refer to the Help Me Connect Guide and the
Power Wave
®
Manager user manual, available from
www.powerwavesoftware.com.
Enabling or Disabling Bluetooth
If Bluetooth is disabled, BT ON will be displayed. If Bluetooth is
enabled, BT OFF will be displayed.
To change the setting, press the Right BUTTON while BT OFF, or
BT ON is displayed. The word ON or OFF will blink. Use the
Selection KNOB to change the setting. Press the Right BUTTON to
confirm the selection, or press the Left BUTTON to cancel the
selection.
Note: Machines shipped from the factory have the Bluetooth
radio disabled. You must enable the Bluetooth radio
using this setting before attempting to connect to the
Power Wave
®
using Bluetooth.
Displaying the Bluetooth Name
To display the name of the Power Wave ® used to identify it as a
Bluetooth device, select BT NAME.
The display will show the current Bluetooth name for the Power
Wave
® . This name can be used when pairing the Power Wave ® to
a computer or other device with Bluetooth.
WI-FI status IndICatOr LIght
The green Wi-Fi STATUS INDICATOR light indicates the connection
type and uses the three “bars” to indicate the strength of the Wi-
Fi signal. The meanings of the indications are summarized in the
table below.
BLuEtOOth status IndICatOr LIght
The blue Bluetooth STATUS INDICATOR light indicates the status of
the Bluetooth connection.
BLUT
OOTH
BT
BT
OFF
ON
BT NAME
pW
R450
All “Bars” Off
Wi-Fi is disabled; or, Wi-Fi is
enabled and the connection is very
poor or nonexistent.
Bottom-Most “Bar” On
Solid Green, Others Off
Wi-Fi is enabled and connected; the
signal strength is poor.
Two Bottom-Most “Bars”
On Solid Green, Others
Off
Wi-Fi is enabled and connected; the
signal strength is good.
All Three “Bars” On Solid
Green
Wi-Fi is enabled and connected; the
signal strength is excellent.
“Bars” Illuminate in
Tandem, from Lowest to
Highest
Wi-Fi is in configuration mode.
Configuration mode is used to
configure the Wi-Fi network settings.
Refer to the Help Me Connect Guide
on www.powerwavesoftware.com
for details.
Indicator is Off
Bluetooth is disabled; or, Bluetooth
is enabled but there is no device
actively communicating with the
Power Wave
® using the Bluetooth
connection.
Indicator is On
Bluetooth is enabled and a device
is actively communicating with the
Power Wave
® using the Bluetooth
connection.