FIGURE C.1
MAKING A WELD WITH THE SPOOL
GUNS
The POWER MIG control circuitry is designed to
sense either the spool gun or (built in) wire feeder
trigger circuitry. The spool gun can easily be plugged
in and will be ready to use.
Closing either gun trigger will cause the electrode
of both guns to be electrically "HOT". Be sure
unused gun is positioned so electrode or tip will
not contact metal case or other metal common to
work.
-----------------------------------------------------------------------
1. Pulling the trigger for the built-in feeder gun:
a.
Disables spool gun operation.
b. Closing feeder gun trigger starts feeder gun
welding and makes both electrodes electrical-
ly "HOT".
ACCESSORIES
CAUTION
+
K2445-1
CABLE ADAPTER
(7-pin to 6-pin)
Note: This adapter is only
for The Magnum SG
Spool Gun.
+ POSITIVE
CABLE AND STUD
GAS LINE
AND 5/8 FITTING
7-PIN
SPOOL GUN
RECEPTACLE