Lincoln Electric K1723-1, Руководство оператора

Страница: 15 / 24

FAST MATE GUNS SERIES MAINTENANCE
D-5
k. Install the cable clamp on the cable jacket within
1/8” (3.2
mm) from the end of the jacket and tighten.
l. Slide the collar nut and cable handle over the connection and
into place.Anchor the cable handle with the screw removed
in step (c). Slide the boot and boot nut into place and tighten.
WARNING
ELECTRIC SHOCK can kill.
Do not touch electricallylive parts such as output terminals
or internal wiring.
NOTE: If the cable handle becomes difficult to slide over
connection, try rotatingit.
m. Install and trim liner per Removal, Installation and Trimming
Instructions on page D-1.
FIGURE D.5
FIGURE D.6
(41.9mm SKIN)
FIGURE D.7
STRAIN RELIEF HOUSING
CABLE ASSEMBLY
GUN HOUSING
CABLE BOOT
GUN TUBE
RED &
BLUE WIRES
TRIGGER ASSEMBLY
DETAIL
(TRIGGER WIRING)
BLACK &
WHITE WIRES
(4 CONTROL LEADS)
CABLE
CONTROL LEAD
1/4" (6.4mm) SKIN
(4 CONTROL LEADS)
CABLE
CONTROL LEADS