INSTALLATION
PRISM® SUSPEND 4000
4. Remove three center 3/8” flange
bolts from top rear panel, then
install upper bracket by reinstalling
the bolts just removed.
Step 6b –
WALL MOUNT ONLY - Install the Wall Mount Brackets
FIGURE A.6b
1. Continue to lift unit at height
similar to used in the hopper
installation step.
3. Install ¼” flange bolts
through holes in bracket
and hopper into holes in
bottom of unit (5 per side).
2. Align lower support
brackets along each
side of unit, then thread
3/8” flange bolts through
the brackets and hopper
into interior rivet nuts
(1 in each corner).
A-7
