Lincoln Electric 95032101NG, Инструкция по технике безопасности, эксплуатации и обслуживанию

Страница: 6 / 36

8695 6642 / C
B-2
POSIMATIC PS03
B - SAFETY INSTRUCTIONS
For general safety instructions, please refer to the specific manual supplied with the
equipment.
1 - AIRBORNE NOISE
Please refer to the specific manual « 8695 7051 » supplied with the equipment.
2 - SPECIFIC SAFETY INSTRUCTIONS
We recommend a concrete floor for the machine to be satisfactorily
stable.
If necessary level the machine and it should be anchored to the floor
through the holes provided for that purpose in the frames.
Before using the machine, make sure that all the guards are in place.
All guard covers must be screwed in.
Only authorised personnel may access electrical cabinets, which must
have locking systems.
Check the state of the electrical cables (supply and controls).
Try the movements without load and check the good functioning of
safety equipment and devices, particularly limit-switches.
Do not exceed the tilting and rotating torques which determine the
maximum admissible load (see diagrams on the equipment).
Do not let loads fall hard on the equipment.
Fully tighten the workpiece(s) on the positioner table.