LINCHR E-Series, Инструкция по эксплуатации и монтажу

Страница: 8 / 45

E-series AC Charger
Configuration manual V1.3 7
2 Installation
This chapter mainly describes how to install the E-series charger. Please read it
carefully. When installing, please install it in the manner specified in the manual,
otherwise it may cause personal injury and equipment damage.
2.1 Accessory list
●A user manual.
●A certificate of conformity.
●Four expansion screws. (For mounted the charger on the wall)
●A mounting template for bracket
●An Anti-theft stainless screw. (Fixed on the wall mounting bracket at the back of
the charger.)
●Optional：Ground fixed post (not include in the product).
2.2 Environmental requirements
The charger can be used outdoors. Pay attention to the operating environment to
meet the equipment operation, otherwise it will affect the service life of the
equipment.
●Operation temperature: -25 ℃ ~ 50 ℃;
●Operation humidity≤95%;
●Avoid of the strong vibration and shock place to install the charger;
●Keep away of the explosive dangerous media, conductive media and harmful
gases those can damage the electrical insulation;
●The use environment should be kept clean, no mold is allowed, and it should be
kept away from moisture, dust, flammable gas, flammable liquid, etc., away from
heat sources and corrosive environments;
●The altitude of the use environment does not exceed 2000 meters;