LINCHR E-Series, Инструкция по эксплуатации и монтажу

Страница: 21 / 45

E-series AC Charger
Configuration manual V1.3 20
3.2 WLAN Access Point
E-series can be connected to a mobile phone or computer via the build-in WLAN
access point. With the device, the web interface can be easily accessed and the
configuration of the charging station can be performed.
Fig.3-2: Phone connection
The following steps are necessary to perform the configuration via a mobile phone
or a computer:
⑴ The charger is in WLAN AP mode by default. When the WLAN is in AP mode,
the charger display panel will light up the WI-FI sign to blue（the sign can not be
saw at first）
⑵ Connect a mobile phone or a computer to the WLAN access point. When the
mobile phone or computer is connected to the WLAN access point, the WI-FI sign
will blink in blue. (When the device is connected to the charger's AP access point, it
needs to disconnect its own data flow, otherwise it is easy to be unable to enter the
background of the web interface due to browser jump problems.)
⑶ After connecting to the access point, you can perform two operations. One
operation can be performed by the user, please refer to “3.2.1. User viewing
interface” The other operation is performed by professional maintenance
personnel, please refer to “3.2.2. Installer view interface”.