IS392 ECN4127
Page 7
INSTALLATION
Ensure the unit is installed on a sound, level work surface. Check that
the side glass is secure then fit the shelf into position engaging the shelf
location pins to prevent movement of the shelf.
Do not install this showcase close to any source of heat which may result
in operating conditions exceeding its design limits. Locations close to
sources of moisture or steam will cause excessive condensation on the
outer surfaces of the cabinet and must be avoided.
Ambient temperature range; minimum 18
o
C, maximum 25
o
C,
Maximum relative humidity 60%
For safety regulations, the plug must always be accessible
.
Leave the product to stand for three hours before connecting to the power
supply and switching on.
CONNECTING TO THE ELECTRICITY SUPPLY
Ensure that the voltage of your electricity supply corresponds to the serial
plate details. The product is supplied with a 13 Amp plug. To replace the
plug, follow these instructions:
•
green and yellow wire to 'E' or (Earth)
•
blue wire to 'N' (Neutral)
•
brown wire to 'L' (Live)
THIS APPLIANCE MUST BE EARTHED
NOTE
