IS 592 ECN 3855
Page 8 of 13
Chromium Plate
Remove debris regularly during use.
After shutdown, allow 15 minutes for the plate to partially cool. Flush with water to
soften any residue. Further cool the plate.
Use a fine metal bristle brush to loosen stubborn deposits.
Repeat the flushing process, adding a small amount of mild detergent to the water,
taking care not to let the fat drawer overflow.
Dry with a soft cloth.
Do not use sharp implements on chromium plates.
Do not use plastic implements for cooking.
SERVICING, MAINTENANCE AND
COMPONENT REPLACEMENT
All servicing, maintenance and component replacement on this appliance should be
carried out by one of our recommended service engineers.
The griddle plate is very heavy and assistance will be required to raise and
remove the plate from the appliance. Care must be taken to avoid injury.
Service Access
Facia panel removal
Care should be taken when removing the facia panel as the igniter leads will remain
attached to the igniter buttons.
Remove the fat drawer and the control knobs.
Remove the screws from the facia panel.
Draw the facia panel free and disconnect the igniter leads from the igniter buttons.
Plate removal
The griddle plate is very heavy and assistance will be required to raise and
remove the plate from the appliance. Care must be taken to avoid injury.
Carefully raise the front edge of the plate at least 100mm and support it securely.
Remove the thermocouple bulbs from the thermostat brackets.
