IS 731 ECN 4421
Page 12 of 15
Door inner glass removal and refitting
With the door open, hold the lower edge of the inner glass and one of the metal
tabs at the top. Carefully pull the glass towards you whilst lifting the metal tab. With
the glass now free at the top, lift the glass panel clear.
To refit, position onto the locating pins on the lower edge and close against the
upper locating pins.
Pull the tabs towards you until the glass drops onto the upper locating pins then
push to engage.
Light bulb replacement
Mechanical units.
Carefully remove the glass cover and using a flat bladed screwdriver. Remove the
bulb. Fit new bulb and replace cover.
Touch units.
Remove four screws holding the cover plate, carefully remove the cover plate,
gasket and glass lens. Remove the bulb. Fit new bulb and re-assemble.
Shelf racks removal and refitting
See Fig 5 (Door removed for clarity).
TURN TO UNDO
TURN TO UNDO
LIFT TO REMOVE
Fig 5
