Lincar G0230, Руководство пользователя

Страница: 24 / 72

mod. G02
24/72
Oven burner
•
To remove the front low band metal sheet placed under oven
door, to enter on injector oven burner.
•
To unscrew the burner nozzle and replaced it with the one
adapted to the type of used gas consulting table 1 on section
“Oven”.
•
To substitute the nozzle of oven spy: unscrew the cap–screw,
then unscrewing completely the nozzle and replace it with the
one adapted to the type of used gas consulting table 3. To screw
the nozzle till to bottom. To reassemble the cap–screw and the
seal washer.
Tab. 3
Methane G20
Butane/Propane
G30/G31
40 20
•
To substitute the by-pass minimum of oven valve: the minimum by-pass to substitute as
instruction of table 4.
•
After the substitution to seal the by pass with varnish.
Tab. 4
Burner
Methane
G20
Butane/Propane
G30/G31
Oven kW 8.4 200 110
Maxi oven Kw 11 220 120
Prime air regulation
•
To regulate prime air of all burners: to place the regulation ear-ring air to the measures
illustrated on following drawings.
Tab. 5
Burner
Methane
G20
Butane/Propane
G30/G31
kW 7.25 A = mm 2 mm
kW 6.0 A = mm
kW 3.5 A = mm All
open
All
open
Oven pilot nozzle
Valve By-pass
A