IT-GB-FR-ES-DE
mod. 730-730 ECO-730N 15a
40/124
SWITCH CONTROL PANEL FUNCTION
•
The Pellet Stove is equipped with an electronic card, installed inside appliance, who
receives the function instructions from the control panel with a display who shows the
data. Pushing different button, it’s possible to select different functions
BUTTON
FUNCTION DESCRIPTION
Button
1
and
2 ................
….
-
To high and to low selected room temperature, to modify the
data value which is programming.
Button
3(SET)
…………
-
To access into programs ( temperature and time ).
-
To confirm select data.
Button
4
……………......
-
To light / To turn off the stove and to exit from programs.
Button
5
and
6
……………
-
To high and to low functioning stove power.
Button
5
……..……………
-
Into the program by pressing 5, it return to the previous.
IGNITION CYCLE
•
The ignition cycle last normally 15 min and it’s composed by 4 different phases which
will be visualized on display with the following marks:
−
“
FAN ACC
”
= Glow – plug pre-heating phase
−
“
LOAD WOOD
” = Pellets Loading phase
−
“
FIRE ON
”
= Combustion Pellets phase
−
“
ON.../ECO
”
= Power function phase
Display
Equipement
phase
Explication
FAn
Acc
Heating ignition
blow plug.
Equipment ignition phase, the equipment is in a phase of
ignition blow plug first heating.
LoAd
Wood
Ignition
equipment phase.
The equipment start to feed the burner with the pellets, it
control the combustible ignition through the fumes feeler.
FirE
on
Ignition
equipment phase.
At combustible ignition ( on right burner side ) the
equipment wait for complete burner ignition in order to start
the power function.
ON
1...5
Power function.
The equipment is functioning on selected power till the
required temperature is reached.
Eco
18°...
24°
Economy
Function.
At programmed temperature reaching, the equipment
functions at min. power (Economy) till the environment
temperature doesn’t lower.