IT
IT
IT
IT----GB
GB
GB
GB----FR
FR
FR
FR----ES
ES
ES
ES mod. 470AZ-480AZ-490AZ 2020
26/64
•
To guarantee a perfect combustion , it’s
necessary to keep the combustible in a
very dry and protected area.
•
The wood – output depends on its
relative humidity in %. (see the schedule
enclosed ).
2.3
STARTING
•
The appliance should set at work only after having completed the following operations:
complete assembling, connection to exhaust fumes duct and to the heating plant. A new
appliance needs to complete the drying process of the paint. During the first heatings you
can notice the following situations:
- During the first ignitions the appliance may exhale bad smell. We suggest a good
aeration of the room till bad smells have been eliminated.
- The complete drying process will be obtained after some heating operations
•
The equipment is a wood stove with a functioning as Normative
EN 13240
.
Thanks to combustion chamber structure, the equipment has an high calorific efficiency.
WOOD LOADING
•
The stove should be loaded manually during the functioning.
•
The loading of combustible should be done when the flame is minimum to avoid
combustion products or fumes outlet from the fire door.
•
To open the fire door, employ the fixture enclosed.
STARTING AND FUNCTIONNING
N.B. For starting never use alcool, fuel or other liquid combustibles
•
In case of starting during particular cold days or with low pressure, it’s advisable to heat
the chimney burning papers in stove.
•
For wood burning loads please read the chapter “Technical Data “ and follow the
instructions indicated for quantities.
