8
www.linarie.com.au
6. SCHEMATIC DIAGRAM
cont. operation
Press 2 seconds.
TRANSFORMER
MAGNETRON
(DOOR OPENED,COOK OFF CONDITION)
R4-1
C4
D2
RY
N
R3
D1
R2
CONTROLLER
JP
1-2
JP
1-1
RY
K4
K2
GND
K3D
RY
H(OUT)
SW2
R4-2
T(IN)
N
P(OUT)
C2
RY
SWB
SO
D
N E L
L
L
C1
R1
F1
NOISE FILTER
L
C3
FU
L
FM
TM
SWA
H
SH
F2
C
SWC
FA
F
_SW
6) Grill
This function has two patterns, you may press "Grill" to
select such functions: (the longest cooking time is
60 minutes).
Grill power have 2 settings,and it’s G-1 and G-2 from
high to low power.
Example: Cooking food with grill for 20 minutes
This allows you to set the microwave oven start and finish
cooking at pre-set time. The clock must be set before you
use this feature.
Example: The current time is 16:30 and you want to start
cooking at 18:15 on P70 power for 10minutes:
Rotate the knob"defrost/Time Setting",set the time to
"18:15" (same procedure as setting clock),
Press "Grill " to select P70 power,
set cooking time
for
10 minutes then
Press "Start/Reset button.
If you do not set the power and cooking time and directly
press the start button once you have programmed the time,
the appliance will only work as a clock. At 18:15 there will
be 10 beeps and the appliance will be switched off.
1) Press "Grill" until the LED displayed "G-1",
2) Set cooking time "20:00" then
3) Press "Start/Reset" button.
When grilling, the food isn't heated by microwave, heat is
radiated from the metal heater at the top of the oven.
When grill is working, the cooking time has 2 stages,
after the 1st half of the cooking, the program will
automatically pause and sound 2 beeps, this indicates
you to open the door and turn the food over, close the
door after turning the food over, press "Start/Reset" button,
the cooking will continue for the 2nd half. If you do not
want to turn the food over, the oven will re-start after
1min pause.
9) Child-safety-lock
Under standby situation, to activate the child safety lock,
press "Auto menu" and "Clock/Timer" at the same time
for 2 seconds. Press "Auto menu" and "Clock/Timer" at the
same time for 2 seconds again, it will unlock the machine.
7) Start/Reset
1) In the course of operation, pressing "Start/Reset"
button will stop operation.
2) If any program was set before pressing start, pressing
this button will cancel all the set program.
8) Timer
1)
2)
3)
1) SWA: PRIMARY INTERLOCK SWITCH
2) SWB: SECONDARY INTERLOCK SWITCH
3) SWC: THE MONITOR INTERLOCK SWITCH
4) L: LAMP
5) FM: FAN MOTOR
6) TM: TURNTABLE MOTOR
7) H: HEATER
* Circuit is subject to change without prior notice.
