11
www.linarie.com.au
7.9 Reminder function
Touch “ ” button under standby state to enter to
reminder function setting, at this time the clock
position hour value will flash, minute value will
long lit. The reminder time setting icon “ ” flashes,
the reminder time icon “ ” is always on.
(
1
) Rotate programming switch KB2 to set the hour,
at this time the hour value is always bright, the value
setting range is 0-23;
(
2
) Touch “ ” button again, minute value
flashes, and hour value keeps bright;
(
3)
Rotate programming switch KB2 to set the minute,
at this time the value of the minute is always bright,
the setting range is 0-59.
(
4)
When the alarm time is set, you can touch
“ ” for confirmation. At this time, the display
shows the system time, the reminder time setting
icon “ ” goes out ,the second icon “
:
” flashes,
the “ ”is always on, and the reminder time starts
to count down in seconds. When the time countdown
is 00:00, buzzer will sound for 1 minute (1s/time),
and the reminder time icon “ ” is always flashing
(1s/time), then press any button to stop flashing.
Note:
(
1
) During setup, second icon “
:
” and alarm clock icon
“ ” will always bright.
(
2
) During setup, touch “ ” button will cancel the current
reminder time setting and return to standby state.
(
3
) If a reminder function has been set, then reminder icon
“ ”should always be displayed when the menu is working,
and the reminder time can be queried.
7.10 Start/pause/cancel function
After setting up the cooking function, touch “ ”
button to start working; if touching “ ” button when
the cooking is suspended, you can restart the work.
During oven cooking, touch “ ” button once can
pause the cooking, temperature and time will flash
display, oven working icon“ ” flashes, function
icon is always on; Touch “ ” button again will
cancel current cooking.
When setting system time, press “ ” button to exit
the clock setting state directly and return to standby state.
When oven function, cooking time and temperature
are set, press “ ” button to exit function setting state
and return to standby state.
After setting the reservation function or entering the
reservation funcation, pressing the “ ” button can return
to standby mode directly.
cont. program functions