Instruction Manual for TECH-system type 239
______________________________________________________________________________
Page 2 of 39 june 2020 ver. 09
LINAK Danmark A/S - Mønstedsvej 9 8600 Silkeborg - Telefon 86803611 - www.linak.dk
Preface
Dear User,
Thank you for choosing an actuator system from LINAK
®
. LINAK systems consist of hi-tech products that
are based on many years of experience with the production and development of actuators, electronic
control boxes, control units and chargers.
TECH-systems is composed of LINAK actuators and a motor control unit developed and produced by third
party manufacturers. The function and operational reliability of TECH-systems have been tried and tested
in a wide range of different situations. In addition, we continuously improve our products and systems so
as to accommodate customer requirements.
This instruction manual describes how to install and maintain your TECH-system. We are sure that your
TECH-system will provide you with many years of problem-free operation.
Before our products leave our factory, they always undergo comprehensive quality and function tests. In
the unlikely event that you should experience any problems with your systems, please contact
LINAK Danmark A/S on +45 8680 3611.
LINAK provides a warranty on all its products and systems. However, this warranty is provided on
condition that the product is used in accordance with the applicable specifications, that maintenance is
performed correctly, and that any repairs are carried out at a workshop that is authorised to repair LINAK
products.
Any changes to the installation and use of LINAK
systems may affect their operation and durability. The
products must never be opened by non-authorised persons.
LINAK Danmark A/S
Mønstedsvej 9
DK-8600 Silkeborg
