Section 3
Maintenance and Service
Check if hydraulic crimper function normally. Any damaged
tool is never used and shall be sent to the authorized repair
shop or our company.
Check that the parts at the mouth of hydraulic crimper can
freely move. Periodically check that all the pipes , axes, and
screws are not damaged. Any damaged part must be re
-
placed with original part by the authorized technician.
Section 2
Technical Index
Piston force:
80 kn
Maximum travel of piston:
14 mm
Hose dimension:
Nominal diameter,
Dn, 5/16“
~5/8“
(Reference outer diameter:
∅
17~
∅
30 at 5MPa)
Standard module group:
7
Operation mode:
Manual
Ambient temperature:
-10~60 ˚
C
Arm strength:
≤
75 Kg
Crimping time:
about 10 s
Noise level:
≤
10 db (Not detected)
Appearance dimension (L x W x H):
780 x412 x43 mm
Weight:
4.73 Kg
After that, the hydraulic crimper shall be thoroughly cleaned.
All the moving parts are greased only with premium hydrau
-
lic oil or ball bearing oil.
Other maintenance : Adjustment and maintenance must be
performed by the our company authorized technicians.
If the seal is damaged, the quality assurance will not be
cancelled.
The hydraulic crimper, which have undergone 20.000 crim
-
ping operations or have been used for two years, whichever
is earlier, must be maintained by the authorized repair shop
or our company.
The hydraulic crimper are sent only after hydraulic oil must
be thoroughly drained from them.
Associated hydraulic oil : H830 (acid number: 0.81 mg
KOH/g) 57ml
Section 4
Supplies
Hydraulic crimper:
1 set
Die set:
7
Suitcase:
1
Appearance and Parts of 37-10291 Hydraulic Crimper.
Tope yoke
Die set
piston
Cover plate
Handle
Yoke
Fixed chuck Oil pump housing
valve
Body
