-9-
HEAT1100/V1-170516
-8-
Fireplace Effect Only Operation (NO HEAT)
Heater Fan Ventilator Operation with Fire Effect
10 First use and operation
Plug the heater into mains power supply.
Set the Operating Switch (B-1) to position 1 (ON).
Keep heat setting switches in OFF position (B-2; B-3)
To turn the heater off, turn the operating switch (B-1) to setting O.
Once the bracket is secure attach the heater by lifting it over and sliding it down onto the
bracket to secure in place.
Mark the hole located on the bottom bracket using pencil on the wall and remove the heater by
sliding it upwards away from the top bracket. Drill the hole and insert the wall plug.
Replace the heater following step 5 and insert the screw through the bottom bracket into the
wall.
Finally ensure that the heater is secure before leaving unattended.
5.
6.
7.
8.
Plug the heater into mains power supply.
Set the Operating Switch (B-1) to position 1 (ON) to activate the appliance.
Set the heat setting by pressing the operating switches (B-2) and (B-3) to desired heat setting.
Both, fan and fire effect illumination should turn on.
To turn the fan heater off, turn the operating switch (B-1) to setting O.
Ensure the heater is unplugged from mains power supply. When correctly set up, plug the
appliance in to the mains power supply.
Operating Switch
The main operating switch features the following
three settings:
To operate the Fan Heater please use the operating
switch to select the desired setting.
- Appliance ON/OFF Switch
- Fire effect only Heater ON/OFF
- Low / High Heat Fan Settings
Never cover the appliance or position too close to the wall and other objects so that it can
sufficiently distribute the heat generated. Ensure the heater is positioned on flat, stable
surface. It is not recommended to use the appliance during adverse weather conditions or
strong winds.
RISK OF FIRE!
1
1
3
3
B
2
2
HEAT1100_Instructions_Final.indd 11
22/06/2016 09:39:11
