3
Sleep mode
Display shows SLP. Press
ɼɾ
for sleep mode time between 5
and 60 minutes.
For manual off, set less time than 5 minutes.
Frequency
Display shows LINE. Select with
ɼɾ
50 Hz or 60Hz.
Time
Display shows S-T. Press ENTER for toggle between
minutes:second (m:s) or hour:minutes (h:m). Set correct time
with
ɼɾ
.
Temperature compensation
Display shows NTC
.
Press
ɼɾ
to select on or off
.
Operation
Measuring
Select a suitable probe depending of measurement a solid surface,
liquid material, gas, or other kind of material.
Turn on the instrument.
Plug in the probe and make correct setup
Start measuring.
Store measurements
Select logging interval.
Press STORE for start logging and press STORE again to stop.
Press ENTER to pause auto logging. Press ENTER again to
continue
For manual store set interval 0:00.
Press ENTER for each manual logging.
Viewing logged readings
Press RECALL and toggle with
ɼɾ.
Cleaning memory
Press STORE. The display shows DATA and blinks.
Press STORE for 2 seconds. The display shows CLR.
Press ENTER and all logged readings will be deleted from
memory. It is not possible to delete readings one by one.
Temp. compensation
Use the offset option in setup to adjust the thermometers reading
to compensate for errors of a specific probe. Place the probe in a
known, stable temperature environment.. See Chance Offset above
Transfer to PC
Connect the instrument with USB cable to PC.
Setup software in the PC.
Press SEND. The display blinks USB when thermometer and PC
are connected. Press SEND to quite.
Battery
Replace battery when battery symbol show up on the display.
Turn off the instrument. Loosen the screw and remove the battery
lid. See fig. Replace with 1 pc 9 V 6F22.
Maintenance
Cleaning the case with soap and water or mild cleaner.
English
Содержание 60
Страница 1: ...60 ...
