3
OPERATING POSITION
To unfold saw into operating position, remove pin
that holds saw arm closed against mast. Make sure
that your loader bucket is rotated up enough that
saw arm can open and come forward without
hitting the ground.
Lift saw arm and pin nylon strap into center
hole with pin you just removed from holding
the mast in the folded position.
The center
hole is used for most of the cuts
. If you are
cutting branches close to the ground and
need the saw arm and mast to be straighter
use the hole closest to the loader. If you are
making cuts that require more angle
between the mast and saw arm, use the
hole closest to the saw blade.
.
