Lily NEXT-GEN, Руководство пользователя

Страница: 15 / 38

11
© Copyright 2003-2017 LILY by Mota Group, Inc. All rights reserved
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
◎
Users can use a power bank or a car charger to charge the battery. Insert the
battery into the charger, and use the USB cable to connect the charger to the power
bank or car charger to begin charging.
◎
The adapter can only be used below 2000m above sea level.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Camera
Lily is equipped with a professional high definition camera- SONY IMX 214,13MP, that
supports 4K and 1920x1080 video shooting.
Lily is equipped with electronic image stabilization (EIS), which reduces or eliminates
vibration in images. With EIS, photos are saved to the built-in memory with a resolution up to
2880 x 1620 at 96 dpi / 24 bit depth. Videos are stabilized at a resolution of 1920 x 1080p at
30 fps. EIS may be switched off.
Signal Frequency
The drone uses 5.8GHz. Different versions may connect with a mobile device at different
frequencies. Please check the aircraft frequency from the package.
Micro-USB Port
While Lily is turned on, use the provided USB cable to connect Lily to your computer. You
can then copy your photos and videos onto your computer.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
◎
Lily must be turned on to be able to connect to your computer.
◎
Lily’s Micro-USB port can only be connected to data communication ports, do
not connect it to power sources like power banks.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Reset Button
To reset the Wi-Fi, default SSID and password, hold down the Reset Button on the base of
the drone for 3 seconds until the Aircraft Status Indicator finishes blue:
• SSID : LILY-NGXXXXXX.
(Labeled beside the battery compartment on the base of the aircraft, the XXXXXX is THE
LAST 6 alphanumeric digits of the Wi-Fi’s MAC address)
• Password :
lilydrone
( all lower case)