Important Information
Disposal of Pen
Storage and Handling
Commonly Asked Questions
Other Information
Where to Learn More
Disposing of Your Used Pens
•
Put your used Pens in a FDA-cleared sharps disposal container
right away after use.
Do not throw away (dispose of) Pens in
your household trash.
•
If you do not have a FDA-cleared sharps disposal container,
you may use a household container that is:
-
made of a heavy-duty plastic,
-
can be closed with a tight-fitting, puncture-resistant lid,
without sharps being able to come out,
-
upright and stable during use,
-
leak-resistant, and
-
properly labeled to warn of hazardous waste inside the
container.
•
When your sharps disposal container is almost full, you will
need to follow your community guidelines for the right way to
dispose of your sharps disposal container. There may be state
or local laws about how you should throw away used needles
and syringes. For more information about safe sharps disposal,
and for specific information about sharps disposal in the state
that you live in, go to the FDA’s website at:
http://www.fda.gov/safesharpsdisposal.
•
Do not
recycle your used sharps disposal container.
Storage and Handling
•
Store your Pen in the refrigerator between 36°F to 46°F (2
C to 8
C).
•
You may store your Pen at room temperature below 86°F (30°C) for up to a total of 14 days.
•
Do not freeze your Pen. If the Pen has been frozen, throw the Pen away and use a new Pen.
•
Storage of your Pen in the original carton is recommended. Protect your Pen from direct heat and light.
•
The Pen has glass parts. Handle it carefully. If you drop it on a hard surface, do not use it. Use a new Pen for your
injection.
•
Keep your TRULICITY Pen and all medicines out of the reach of children.
Commonly Asked Questions
What if I see air bubbles in my Pen?
Air bubbles are normal.
What if I unlock the Pen and press the green Injection Button before pulling off the Base Cap?
Do not remove the Base Cap. Throw away the Pen and get a new Pen.
What if there is a drop of liquid on the tip of the needle when I remove the Base Cap?