3.Junior User Guidebook
7
8.
USB Device port:
It is used to transfer data when external USB equipment connects to
the oscilloscope regarded as "slave device". For example: to use this port when
connect PC to the oscilloscope by USB.
9.
Lock Hole
: You can lock the oscilloscope to a fixed location using the security lock
(please buy it yourself) to secure the oscilloscope.
10.
AV Port
: AV signal output port (optional).
11.
Trig Out(P/F)
port: Trigger signal output or Pass/Fail output.
Control Area
8
7
6
1
2
3
11
10
5
4
9
Figure 3-4 Control Area Overview
1.
Function button area
: Total 11 buttons
2.
DAQ:
Multimeter Recorder (This function is not available in XDS2000 series.)
P/F:
Pass/Fail
W.REC:
Waveform Record
3.
Trigger control area
with 2 buttons and 1 knob.
The Trigger Level knob is to adjust trigger voltage. Other 2 buttons refer to trigger
system setting.
4.
Horizontal control area
with 1 button and 2 knobs.
"HOR" button refer to horizontal system setting menu, "Horizontal Position" knob
control trigger position, "Horizontal Scale" control time base.
5.
Vertical control area
with 3 buttons and 4 knobs.
"CH1" and "CH2 " correspond to setting menu in CH1 and CH2, "Math" button refer
to math menu, the math menu consists of six kinds of operations, including CH1-CH2,
CH2-CH1, CH1+CH2, CH1*CH2, CH1/CH2 and FFT. Two "Vertical Position" knob
control the vertical position of CH1/CH2, and two "Scale" knob control voltage scale
of CH1, CH2.
