background image

Sviwels (2 pcs)

Are attached to 

the curl hooks

)

Rope locks (2 pcs)

Used for adjusting 

the height of the 

Rope (2 pcs)

The rope length is 

between 2.0 and 

4.0 meters depend-

ing on the variant. 

Suitable ceiling 

height is between 

2.0 and 4.8 meters. 

Trapeze (1 pcs)

Material: Oak / Birch

Size: 

544 mm, ø 28 mm

NOTE 

 

 

This product is NOT intended for children  

   

under 3 years of age.

WARNING!

 

We do not take ANY responsibility for    

   

possible accidents or damage caused by  

   

failure or neglect to follow, or  

   

misunderstanding this manual.

NOTE

   

 

The maximum permitted capacity is 90 kg.

NOTE

   

 

This product is intended for home use. The 

   

trapetze shall be used by one (1) person at a  

  

time.

NOTE

    

This product is intended for indoor use.  

   

Please refer to “outdoor use” for more 

 

  

information

.

NOTE

 

  

This manual guides you through the  

   

installation and use of your Lillagunga Bone  

   

to a ceiling.

NOTE

    

This package does NOT include curl hooks,  

   

unless separately ordered. 

REQUIRED TOOLS

WARNING!

 

Avoid placing the trapeze over hard floor 

 

 

ground materials such as asphalt, concrete  

 

 

or glazed tile. Use softening materials to  

 

 

reduce impact in case of an accident.

WARNING!

 

Do not place the trapeze near an open fire 

 

 

or other sources of strong heat, such as  

 

 

electric bar fires, gas fires etc due to the risk  

 

 

of fire.

Power drill and a drill bit

Type and size dependent on hook model  

and ceiling material

Pencil

Ladders, a tall chair or similar to reach the ceiling

Measuring tape

INSTALLATION

1.  We recommend to reserve two (2) meters in front/behind, 

and on both sides of the trapeze.

2.  Use the ladders to reach the ceiling. Make sure that the 

ladders are stable and stand firmly, drilling vertically may 

distract your balance.

3.  Use a measuring tape and mark two points at 

48-50cm

 apart 

from each other. Drill two holes, and screw the hooks into the 

ceiling. 

4.  Rotate the ends of the curl hooks pointing to the side.
5.  Make sure that both hooks are tightly in place. 
6.  Test before use.

WARNING!

 

Ensure that the hooks will be attached to a 

 

 

bearing part of a ceiling. Consult an expert  

 

 

in uncertainty.

Weight of product:

Oak: 825g

 

Birch: 745g

NOTE

  

If you have purchased Curl Hooks from  

 

 

Lillagunga, please follow the instructions  

 

 

that come with the package.

BONE

 

USER MANUAL  

ver. 

1.1

READ THIS MANUAL CAREFULLY BEFORE 

INSTALLING AND USING YOUR LILLAGUNGA BONE

Отзывы: