Bachmann Europe Plc
H0 1:87
7
Cornering capability
This model is designed for track systems with even a narrow track radius –
minimum radius R 356 mm.
Maintenance and care of your model
To ensure a long useful life, your model should be serviced regularly. For minor service, the model
does not need to be opened. Simply place the model on a soft surface as shown in
Fig. 2, clean the
wheel contacts with a cotton swap dipped in denatured alcohol, and then clean the wheels.
Under no
circumstances should you turn the drive wheels of the locomotive by hand. After cleaning, apply
a drop of machine oil to the bearing points shown in
Fig. 2. Use commercially available oils with a fine
canula or a pin.
Caution: Do not use cooking oils or skin creams!
Super-detailing your model
All details are factory fitted with the exception of the two storage compartments
SK. These are intended
to complete a static display model or for use when the loco is operated on very large radius curves as
they limit the side play of the rear bogie.
Fig. 3 shows how these storage compartments are inserted into
the existing storage unit mouldings from below.
Fig. 2
