Lilin ZR8022EX10, Быстрое руководство по установке, Страница: 8 / 13

-6-
E
n
g
lis
h
(2). Use a PoE network switch to connect to the network.
(3). Use a PoE power injector and a network switch to connect to
the network.
Emergency Factory Default
To restore the hardware to factory default settings, please follow
these steps:
1. Press and hold “RESET Key” for 10 seconds and release.
2. Wait for about 40 seconds, and the network LED light should turn
off, and go back on again.
3. The camera is now restored to factory default settings, and will
reboot automatically.
4. Search for the IP device using the IPScan software.
5. Start the IP device via an Internet browser.
6. Enter the default username “admin” and password “pass” to
operate.