Installation
●
SUITABLE LENSES
Lenses used must be either C or CS mount type. The protrusion
behind the mounting surface must fit within the following
requirements:
●
FITTING THE LENS
1. Remove the lens mount cap.
2. Screw in the C mount ring until it is secured. (When using a CS
mount lens, skip this step.)
3.
Screw in the lens until it is secure.
4. Insert the lens plug into the AUTO IRIS connector. (when fitting
a manual iris lens, skip this step.)
5. Adjust the focal length by turning the focal length adjustment
ring.
(Use hexagon screw driver to loose or tighten the screw.)
E
n
g
li
s
h
- 3 -
Содержание UHG1182E
Страница 3: ...Product Overview English Unit mm 1...