Lilin PIH 7000IP, Быстрое руководство по установке

Страница: 6 / 14

Step 5
Attach the Camera Body and Base
TXDI
-
TXDI+
GND ALARM 1
Step 6 Connection
VIDEO
OUT
Network
1. Reconnect the connection cable.
2. Attach camera body to base. 3. Turn camera body clockwise to tight position.
4. Tight the three screws to fix the camera body.
1. Connect RS-485 cable.
2. Connect video signal cable. 3. Connect alarm output cable.
4. Connect Ethernet cable.
Step 7
Install Camera Body and Decoration Ring
1. Put camera body and the fix ring into the hole.
2. Turn the camera body clockwise to tight position.
3. Tighten three black screws. 4. Put on decoration ring.
5. Turn the ring clockwise to tight position.
Step 8 Install The Dome Cover
Note : After dome cover is attached, use glass-cleaning cloth to clean dome cover.
Unclean dome cover may affect camera performance.
1. Attach dome cover to camera body.
2. Turn the dome cover clockwise to tight position.
Page 5 of 12 IP Fast Dome Quick Installation Guide