INSTALLATION
FIG. 1
2. Embedded Mounting
A. Disassemble base & inner fix ring and keep the ring only.
Please refer to FIG.2.
B. Use the provided screws (M3.0x20, wooden screw-flat
head) to screw 3 points of "b" on the inner fix ring to mount
it on the desired position. Please refer to FIG.3.
3. Put in the dome and fix the outer fix ring to the inner fix ring
and twist it to the lock position. Please refer to FIG.4 & FIG.5.
NOTE: Make sure the " " mark next to the lens is on the
upside.
1. Attached Mounting
Use the provided screws (M3.0x25, wooden screw) to screw
3 points of "a" on the base to mount it on the desired position.
Please refer to FIG.1.
a
a
a
