Lilin NDR104, Руководство пользователя, Страница: 22 / 63

NDVR User Manual
21
Chapter 6-2-7. IP Camera Setup
To setup IP camera, please follow the following instructions.
Camera IP Address: the IP address of the IP camera
Camera HTTP Port: the HTTP port number of the IP address (default 80)
Camera RTSP Port: the RTSP port number of the IP address (default 80)
Username: Username of the IP camera (default: admin).
Password: Password of the IP camera (default pass).
ONVIF Setup: ONVIF setup.
IP CAM Table ID: Assign the IP address to the table ID.
Set IP Cam Table: Assign the IP address with the table ID to IP camera table.
Init IP Cam Table: reset IP camera table.
Chapter 6-2-8. WS-Discovery
Web Services Dynamic Discovery (WS-Discovery) is part of ONVIF protocol for searching
IP cameras via LAN. This utility simplifies setup up IP address of an IP camera. Please use
this utility scans all the IP cameras in LAN. Pick a scanned IP camera for NDR’s channel fo
r recording and live monitoring.
Chapter 6-2-9. Select Camera Table
After setting up IP addresses of a NDR, the IP address of the IP camera can be set into cam
era table for quick addressing. The IP camera table can also be used by other NDRs.
Chapter 6-3. Monitor Setup
MONITOR
VIDEO ADVANCE
OUTPUT RESOLUTION SXGA
BACKLIGHT SAVING OFF
MONITOR STAND BY MODE OFF
MONITOR STAND BY TIME OFF
MAIN ALARM SWITCH OFF
MAIN MONITOR SEQ TIME
SPOT ALARM SWITCH
SPOT/QUAD SEQ TIME OFF
Chapter 6-3-1. Video Advance
To setup advanced HDMI/LCD/VGA video setting, please following this section.