Lilin IRS1204, Инструкция по эксплуатации

Страница: 9 / 15

Step 1 Separate bracket from the baset
60mm
70mm
Loosen the four screws
from bracket.
Separate the bracket
and base of bracket
from the bolt.
Drill holes at the
desired location.
Tighten the four screws
to secure the base
(These four screws are
not included. User must
prepare their own
screws)
Step 2 Fix base of bracket on the wall
If you have use for this
hole, use the included
hammer to break the
seal.
Loosen the two screws
from iron pieces of the
fixed cable in the
bracket and remove
the iron pieces.
Attach the camera to
the bracket, and
tighten the three
screws.
Pull the output cables
of the camera in
sequence through the
bracket tube
(AC cable is preferred)
Step 3 Attach camera to bracket
INSTALLATION
- 7 -