48
1
-
4
.
ENVIRONMENT:
Push joystick down to select <ENVIRONMENT>, and then push joystick left or
right to select INDOOR mode or OUTDOOR mode.
ATW delay time ranges are 0 ~ 255 (short ~ long).
Note:
In indoor mode the color temperature is fixed at approximately 3200K.
In outdoor mode the color temperature is fixed at approximately 6300K.
1
2
2
Auto White Balance Control mode, suitable for any color temperature environment.
Note
:
This function adjusts the white balance regardless of the subject conditions.
Pull-in control is exercised at all times independently of the pull-in frame which
was set by the pre-white balance adjustment.
3
.
USER1:
Manual White Balance mode 1, suitable for 1800 ~ 10500K color temperature
environment.
Select <USER1>, and press
key into USER1
WB adjustment image.
Push joystick down to select <R-GAIN>, and then
push joystick left or right to adjust white balance to
lower color temperature, and push joystick down to
select <B-GAIN>, and then push joystick left or right
to adjust white balance to higher color temperature.
Confirm color temperature, and then press
key to
record data in the memory.
4. USER2:
Manual White Balance mode 2, suitable for 1800 ~ 10500K color temperature
environment.
Select <USER2>, and press
key into USER2 WB adjustment image.
.
AWC (Auto White balance Control):
C.SET
CTRL1
USER1
WB
R-GAIN
B-GAIN
BACK EXIT
30
20
C.SET
CTRL1
C.SET
CTRL1
Push joystick down to select <ATW FRAME>, and then push joystick left or right
to make selection.
1
-
3
.
ATW FRAME:
X0.5
→
X1.0
→
X1.5
→
X2.0
push joystick left or right to adjust white balance to
lower color temperature, and push joystick down to
select <B-GAIN>, and then push joystick left or right
to adjust white balance to higher color temperature.
Confirm color temperature, and then press
key to
record data in the memory.
Push joystick down to select <R-GAIN>, and then
USER2
WB
R-GAIN
B-GAIN
BACK EXIT
20
40
C.SET
CTRL1
