Turn the dome cover
counter clockwise
Separate the dome
cover from camera
Separate the camera
body to the base
Attach base to ceiling
Set all of control cable on middle position and
through the hole of ceiling.
Install rubber cover on the cable outlet of base,
base, or set control cable on the cable outlet of
base.
Attached Mounting (Fixed Ceiling)
Step 1
Fix The Base
Untighten the two
screws from base
Turn the camera cover
clockwise
47.0
47
47
27.75
8.93
120
?
120
?
18
6.5
Tighten the three
tapping screws into the
ceiling
Base size and screw
location
Step 2
Attach the Camera Body and Base
Tighten the two screws
to fix the camera body
Attach camera body to
base
position connector is
correct or not.
Notice:
Turn camera body
counter clockwise to
tight position