13
(3). Hardware Installation using DC12V Adaptor.
PC
LAN
LAN / Internet
Non-PoE Switch
To restore the server to factory default settings, please:
1. Hold Reset Key for 10 seconds.
2. The network LED lights turn off after about 20 seconds, then lit.
3. The server board reboots itself.
4. Using IPScan scanning for the IP address of the IP device.
5. Launch Internet browser for the IP address of the IP device.
6. Type default username "admin" and password "pass" for enter web interface of the IP
device.
For convenient purpose, IP address resets to default IP address, 192.168.0.200, after
performing Load Default operation.
NOTE
EMERGENCY FACTORY DEFAULT
IPG012ES
HD
DC12V Adaptor
