7
Chapter 2 Before accessing IP cameras
Before accessing the IP camera, make sure that the camera’s RJ-45 network, audio, and
power cables are properly connected. To set the IP address, consult your network
administrator. The default IP address for each IP camera is 192.168.0.200. Users can use
the default IP address to verify the camera’s network connection.
Chapter 2-1 Configuring IP addresses using IP scan utility
To configure an IP address using the IP scan utility, copy the IP scan application from the
installation CD to your local PC. Alternatively, you can execute the IP scan software
from the installation CD directly. The IP scan utility can also be downloaded from our
company website. To change an IP address, subnet mask, gateway, or HTTP port, follow
the steps below:
Run the IP scan utility
Click “Refresh”. All available devices will be listed in the device list
Select the device item from the device list
To edit or modify addresses, subnet mask, gateway, or HTTP port, use the box
Click “Apply” to configure the settings
Click “Refresh” to verify the settings
Chapter 2-2 Configuring IP addresses using HTML page
To change an IP address using a HTML page, type the default IP address (192.168.0.200)
