Base
For easy assembly,
position the partition at an angle
then turn it upright.
Partition
For Boot Storage
The Shoe / Accessory Grid can be expanded in Vertical and Horizontal combinations.
Remove all items out of the cubbies before expanding.
How to expand
Remove all items and lay the Shoe / Accessory Grid down the same as when assembling.
Remove the connectors at the desired extension points.
Snap the extension main and side boards and insert the connectors.
①
②
③
Ridged side
Step-3B – If using partitions on interior of grid.
Place the partition into the 2 holes in the middle of the main board.
①
To create Boot Storage, do not install
the main board between 2 cubbies.
③
Position 2 partitions as back panels.
④
Insert the 2 remaining connectors.
②
Flip the grid over and insert the 6 connectors
into the main and the side boards.
Do not insert the
connectors yet.
Use the 2 cubbies from the bottom
when creating Boot Storage.
2 cubbies
Boot
Ridged side
Custom Configuration
(with additional 3 or 6-Section Shoe / Accessory Grids; or Vertical and / or Horizontal Add On Kits – sold separately)
Insert the partition
to the end.
