Lika Modbus LDT10, Руководство пользователя

Страница: 29 / 44

LDT10
5.7 Node status page
WARNING
All users are allowed to display this page.
When you press the
DETAILS
key in the
Node control
page you enter the
Node
status
page. In this page the complete list of the available alarms and statuses
is displayed. The alarms and statuses currently active are highlighted by a red
box that appears on the left side of the field. For a comprehensive description of
the available alarms and statuses please refer to the “
Alarms ” and “ Status
Word
” registers in the “User's guide” of the specific actuator.
To reset an alarm condition of the Slave device (provided that the fault
condition has ceased) press the
RESET
key in the
Node control
page. The
RESET
key is available to the level 1 and level 2 users only. Refer also to the “
Alarm
Reset
” function in the “
Control Word
” of the device.
Press the key at the top of the page to enter the
Node control
page. For
any information please refer to the “5.6 Node control page” section on page 26.
Press the key at the top of the page to enter the
Network
page. For any
information please refer to the “5.5 Network page” section on page 25.
Press the key at the top of the page to move back to the
Home
page. For
any information please refer to the “5.10 Home page” section on page 37.
MAN LDT10 E 1.2 HMI interface 29 of 44