Lika IF50, Руководство пользователя

Страница: 17 / 40

IF50
10 – Main window and soft keys
The tool main window is divided into panes (sections).
In the PARAMETERS pane on the left side of the window the complete list of
unit parameters can be found.
In the INPUTS pane the soft keys to switch the control commands to ON / OFF
are available. Display boxes in the RS column indicate when the corresponding
command is set to ON via PC. Display boxes in the PI/O column indicate that the
corresponding command is ON via external hardware.
The boxes in the OUTPUTS pane provide information about the state of the unit;
STATUS A and STATUS B boxes are especially useful to monitor the counting
inputs:
•
STATUS A box lights up when a counting pulse is detected on input A;
•
STATUS B box lights up when a counting pulse is detected on input B
(only if either A+B or A-B operation modes are enabled, see parameter
A/B Mode
on page 59).
The colour bar graph in the bottom centre displays the actual output state in
the range -/+100 % of full scale.
Keys in the CONTROL pane are are designed to activate readout, transmission
and storage of parameters.
MAN IF50 I_E 1.0.odt 10 – Main window and soft keys 57 / 80